SMS Notifications in Signals
Hello, My company is evaluating Site24x7 Signals as a replacement for our existing customer-facing status page solution. One major feature we desire is the ability for our customers to subscribe to SMS notifications, both globally and at the component level. Is this available, or on the roadmap for the near future? Thanks, William Wallace
SNMP traps - few suggestions
Though its in beta form, I have been using it. Its definitely a good feature addition to site24x7. I would like to have the following features in SNMP Traps: 1. For a device to be added in a trap processor it must be a licensed node, which is fine. The challenge is for many devices we monitor a different IP address than the interface from where the trap is generated. There is a business case for this, which cannot be changed. So, in effect for those devices I am consuming two licenses, which is not
Configuration Rules - Preview Results Prior to Running
I think it's important to be able to preview what a configuration rule is going to do prior to running it. That could either be with a csv report, a window to show what monitors would be affected, etc. I don't see a way to do that right now. When performing a Bulk Action we get to see the filtered monitors that will be affected prior to running the action.
VMWare Metrics Monitoring and Alerting
It would be very helpful to have a bit more granularity and choices in the VMware monitors. Specifically: Datastore Usage - Track disk use over time and alert on datastores that are reaching capacity Hardware Status - You are pulling the underlying metrics but not the red/green status that could be alerted upon ESX Memory - The metrics are pulled, there is even a button to set thresholds but no fields/thresholds to set in that screen VM CPU Metrics - You report CPU Ready as an ms value but when reading
zoho desk and zoho assist integration
This would be great to have in the future.
Server Agent Rollback
We have the Agent Auto Upgrade enable, since last week we are facing an issue where the new agent was reporting services on the server monitors as down, and the services on the destination server were not down, this was identify as a Agent version issue. We are requesting the option for Agent rollback on server monitors.
Gluster Health Check
it would be grate if support to monitor / health check to support Gluster / Red hat Gluser
Remote Server Connectivity Check in Resource Profile
It would be helpful to be able to enter a remote IP and port for a server to check connectivity. Currently, it seems only local resources can be checked by utilizing the server IP or localhost. For example, for a server named TEST with IP address 10.0.0.5 it would be useful in the Server Monitor resource checks profile to test connectivity to a different server (SERVERB with IP 10.1.1.10) by entering the remote server IP address and port.
Add possibility to create Availability Summary reports based on locations
Recently our UK market requested to get an Availability Summary report based on UK location only. Searching the tool and talking to your support team it seems that this feature is missing. So, it would be great to just like you have it for websites add this option to Monitor groups as well. Let me know if you need further requirements specifics.
unable to create visualized view of monitor groups
We need all the websites configured on one monitor group under a single report, I have also tried custom report still that doesn’t provide visualized report. This features looks to be unavailable on site24x7. This will make our analysis easier for all the websites, or else we need to analysis all reports one by one which is more tough.
Signals Private Pages
Signals is looking like a great new product but it doesn't quite meet our needs for Private Pages yet. We need to protect private pages but IP whitelisting will be too hard to manage. We need SSO protected pages using Okta without requiring a local user list in Signals. Managing users in Okta and Signals is not feasible. Please let us know if this can be considered. Thanks Phil
Microsoft Azure Monitoring
Would be great if we could monitor our Actual Microsoft Azure Hybrid cloud rather than just the VMs hosted in the cloud. Would also be good if we could monitor our DaaS SQL Databases in Azure as well as our web applications. We currently have to log into the MS Azure portal to get any metrics, for example http requests on a web app and the errors. You should be able to monitor the subscriptions, monitor the various data centers which Azure is hosted in. Traffic Manager etc The possibilities of your
Server Resource Check Profile - Windows Event Log
Hi, I am trying to setup a Resource Check Profile which will catch all the critical events from any of my servers irrespective of source from where the event logs were generated (e.g. Microsoft-Windows-Kernel-Power, NETLOGON , Microsoft-Windows-DistributedCOM, Microsoft-Windows-GroupPolicy, Service Control Manager and many more). Currently, I don't think there is an option to do so. It will be good to have a wildcard options e.g. * and/or regex pattern to select both source as well as EventLogName
Enhancement - Applogs - Multi-tenancy / organization
Hello, It would be great to have the Applogs>Profiles/Types be able to be grouped. This would allow us to run multiple products, in our environment, and keep them silo'd as needed. Currently there is no Sort on Applogs>LogTypes or on Applogs>Profiles. Between the lack of sorting, and the inability to group, we have run into a roadblock that directly affects the next portion. There is no way to call the specific logprofile when creating the log alert. This means we have to set up an individual alert
Increase On Premise Poller Refresh Rate
Hello Developers, It would be great if we could decrease/increase the polling time for the On-Premise Poller. In my particular example, I want to poll the remaining battery time in my UPS. This would be useful to know in the event of a power-cut. As for now, it just polls once every 6 minutes, which in my opinion is not enough. I'd like to poll it once every minute. Thanks
Site24x7 monitoring from Cloud Regions
I know we can maintain our own pollers to do this but it would be a great added benefit to Site24x7 to have actual site24x7 owned pollers that allow customers to be able to monitor from cloud provider regions. This would allow clients with services in AWS to be able to monitor them from the different cloud regions as well as the normal location base that is already offered.
monitor file in a Microsoft cluster
Hi, Currently there is a way to monitor file (change of time stamp, size etc etc), but its only limited to a stand alone server. There is no way I can monitor a file which is serviced by a Microsoft Cluster. If I put a monitor on one node, its going to fail on other node of the cluster as the file will will be accessible from one node of a cluster at any point in time. Need this feature be available in a cluster file server. Thanks, Ash
Bulk Delete Monitors (VMware)
I would like to see the feature/ability to bulk 'delete' VMware VM's based on it's status (UP or DOWN) CURRENT ABILITY Admin > Bulk Action > Delete Monitors > Monitor Type > is > VMware VM This provides a full list of VMware VM's regardless of status, without the ability to filter down on the status (UP/DOWN/or other) I was in position where several hosts were added that made up 200+ VM's. Some of those ESX hosts were deleted, however, the VM's staying but were reporting as DOWN. To manually remove
Site24x7 | Adding IP address in the Email notification subject
Dear Team, I would request to provide a macro to add IP address in the email notification subject Regards, Anand Babu
Critical and Warning time for Cert Expiration
Would be nice to be able to set a critical and warning threshold for Cert checks. We currently are looking at migrating more checks into Site24x7 and about 100 of those are cert checks that we need the dual alerts for. Thanks.
Go addition for APM
Go is starting to ramp up in adoption and it would be nice to see it supported in the APM supported languages.
Capturing mongodb queries in APM insight monitor
Dear Team, We would like to know if the slow query statements executed for mongodb can also be captured in APM insight monitor the same way it is being captured for sql queries. Also it is not being detected as a database as well in the monitor.
Page Load Time By Location - new API method
Hello Support Team, We need in Site24x7 an API method to get 'Page Load Time By Location' for Web Transaction with last polled values.
RUM: need to exclude some ajax polling call
Hi, We are evaluating Site24x7 RUM monitoring for our SinglePageApplication (SPA). However we have on our pages some ajax polling request (30s) that we need to exclude from monitoring otherwise the average page time is totally false. Do you plan to have this feature ? Best, Ch. Potter CEO-Vision S.A.S
Custom Time Period and Unit of Time
Hi team, I would like the option to select Unit of Time if I select a Custom Period for Performance Report. Currently for last 30 days/this month the unit of time has options like RAW, Hour, Day, Week. For last month and this year the options are Hour, Day & Week. But the moment you select Custom, Unit of Time option is removed. I guess the logic behind is if someone select a very long before (example number of years) and select the Time of unit as Hour, then it can kill the request. But when I select
Homepage to display monitor trouble or down reason
Hi, Currently the homepage shows the status of monitor with downs first, then troubles and then rest of the monitors, which is perfect. However, it will be great if there is an additional column (in addition to Monitor name, performance and last polled columns) indicating the reason of the monitor down/trouble status e.g. memory utilisation more than 90% or disk space less than 5 % etc, whatever it may be. To find out why a monitor is in trouble I have to click on that monitor and then figure out,
Share a dashboard with domain name like a staus page
The status pages allows for a rebranded URL under the option "Access your service status on your own domain". It would be nice to be able to do this with a custom dashboard as well.
Dashboard drill down
Hi everyone! I'm creating custom dashboards and I'm interested in being able to create a view by environment, and as I need it, to be able to drill down, is it possible? I have tried to introduce an iframe towards the lower level dashboard, but I have already seen that it is not allowed. However, I have managed to make a business view somewhat similar to what I want, but I cannot drill down to reach the subgroup dashboards, for example. That would be perfect.. Thanks in advance,
Ability to determine if SQL Jobs are running longer than normal
Hello, I'd like to request the ability to be notified if specific daily SQL jobs are running significantly longer than normal (perhaps using an average of the last 4 instances of that job's performance over whichever day of the week it is). In DevOps tab for SQL Server we can see the all-up success/failure ratio...but we cannot drill down any further than this to get more relevant information. In addition, I would like to be able to drill down to the task level within the Job itself, and know which
Unix/Linux Mounting Point Monitoring
We have several Linux/Unix with Mounting points and we want to monitor the presence of the mounting points
Alerts in Site24x7 for Hardware failures on ESX/ESXi servers
It would be very interesting to be able to create alerts when there is a hardware failure on the ESX / ESXi servers. Currently collect the hardware status information but does not trigger any alerts in case of failure. Thank you
Alerting on down pollers via 3rd party integrations
We currently use internal pollers and started using PagerDuty to page us if something goes down and needs to be looked into quickly. As of right now, the only option for alerting if a poller goes down is email; can we get other methods added for alerting endpoints as the other monitors do? We had one of our pollers die a few days ago and nobody noticed because we got emailed. We did get a PagerDuty alert but because it does not match the rules we use for actual monitors it did not get converted into
Consolidated view of Resource Check Profile for monitor group and associated Resource Check Profile server monitors
Hi, Currently the Resource Check Profile is only visible when selecting an individual server, but it would be really valuable if I could add the view of the resource check profile to a monitor group, so I can immediately view the status of all resource check profiles associated with servers in the server monitor group. My use case is for a URL check on each server to ensure the service is available, but could extend to port check and directory check. Having this view in the monitor group would be
Threshold and Availability - display number of monitors using it
It will be good to display the number of monitors being by a Threshold and Availability profile, the way you display the number of monitors against an on-site poller. In admin --> Configuration Profiles --> Threshold and Availability Regards, Ash
S.M.A.R.T. Drive Status Monitoring
Add monitoring of S.M.A.R.T. drive status. There was a response to a community post about creating our own plugin for this, but would prefer if this feature was built into the server-site agent. Thanks, Max
Alert escalation - need option for alert medium to notify
Hi, I am not sure if the following is possible using the current product. I don't think it is. It will be good to have these features. 1. Currently when I create a notification profile there is no way I can define in that profile as how I am going to notify the user,/recipient e.g. via email or SMS or both etc for certain monitors. Its all or nothing at this moment. It will be good to have an option for alert medium. 2. There is no way to escalate at multiple levels for an incident. For example for
Groups as dependencies in Monitoring dependencies
Example: I´ve a group for the switches as well as a group for the WiFi APs. I would then connect the dependency of the AP group to the switches so that if the switches group goes down, no alarm mails for the APs would be sent. Because I basically don´t care which AP is connected to which switch in terms of monitoring. When a switch or a whole group of switches is down, I´ll first take care of those. Only after the switches are up again I will look after everything else whether being up again or not
Please provide option to test a monitor before putting it live
When I am adding a new monitor e.g. for a website, there no option to test my checks whether it passes or fails before put into the production mode. To avoid false alerts, it will be good to have an option to validate the current status of a monitor before putting it in active condition. There is no point of adding a monitor if it fails immediately after adding. I rather correct the condition first and then add the monitor. Specifically this will be useful when I am checking rest endpoints or websites
Group Monitor Navigation Suggestion
I think it would improve navigation if when viewing Monitor Groups you could drill down to associated monitors without exiting the group monitor view. A pull down for the group members would also improve navigation allowing for the exploration of the different monitors that are members of the group without having to use the browser back functions or using other methods like clicking on "Inventory" then the group name to get back to the group. Even without the pulldown it would aid navigation to be
mongodb monitoring
A monitor for mongo db that we can use to check the status and load of the db. Also maybe queries that are slow.
Next Page