Licensing for network monitors

Licensing for network monitors

Site24x7 uses a network component license for monitoring network devices, interfaces, and components. This licensing approach ensures flexibility and scalability for organizations as they expand their IT infrastructure.

What is a network component license? 

A network component license is a unit of licensing required to monitor an individual aspect of your network infrastructure. 

How does it work? 

  1. Monitoring a network device consumes one network component license. Through SNMP, you can monitor up to 100 network interfaces for availability and performance. 
  2. Monitoring every additional interface on the device consumes one network component license. For example, monitoring 200 network interfaces in a device consumes two network component licenses.
  3. Analyzing the traffic of a single interface in NetFlow Analyzer will consume one component license.
  4. Tracking device configuration changes for one device in NCM will consume one component license. This also includes firmware vulnerability management and network configuration compliance (supported only in the Enterprise pack).
The table below lists network component licenses required for monitoring additional resources.
Monitor types
Monitor count
License usage
Network device
1 (up to 100 network interfaces)
1
Additional network monitoring interfaces
100
1
NetFlow interface
1
1
NCM
1
1
Cisco Meraki Organization
1
1
Cisco Meraki Device
1
1
VoIP 
1
4
WAN RTT 
1
4
IPAM: Subnet
1 (up to 40 used IPs)
1
IPAM: Additional used IP addresses
40
1
Cisco ACI
1
2
Wireless LAN controllers (WLCs)
1
1
Access points
2
1

Benefits of the network component license model  

  1. Scalability: Easily add licenses as your network grows.
  2. Flexibility: Tailor monitoring efforts to specific devices or features important to your operations.
  3. Cost efficiency: Pay only for the components you monitor, avoiding unnecessary expenses.
  4. Comprehensive visibility: Monitor any component using the same licensing structure.

FAQ

  1. How do I determine how many licenses I need?

    Calculate the total number of devices and interfaces you plan to monitor. For example, if you are monitoring ten devices and 100 interfaces on each device, you will need ten network component licenses. However, if you are monitoring ten devices with 200 interfaces each, you will require twenty network component licenses. 

  2. Is there a cap on the number of components I can monitor?  

    Site24x7 is designed to scale, and you can purchase additional licenses as your monitoring requirements grow.

  3. Can I get a trial for network component licenses?  

    Site24x7 offers new customers a 30-day trial, allowing you to test network monitoring capabilities, including component licensing.

  4. If I purchase 100 component licenses, how can I use them?

    You can use them in the following ways:

    1. Network devices and interfaces: You can monitor a total of 10,000 network interfaces across 100 devices, with each device having up to 100 interfaces. 
      Other combinations include:

      1. 50 devices with 200 network interfaces each
      2. 10 devices with 1000 network interfaces each
      3. 20 devices with 500 network interfaces each
      4. Any other combination that totals up to 10,000 network interfaces, but the interface count on each device should not exceed 100 for each license
    2. NetFlow interfaces: You can monitor a total of 100 NetFlow interfaces across 100 devices.
      Other combinations include:
      1. Ten devices with ten NetFlow interfaces each
      2. Five devices with 20 NetFlow interfaces each
      3. Two devices with 50 NetFlow interfaces each
      4. Any other combination that totals up to 100 NetFlow interfaces
    3. NCM devices or IPs: With 100 component licenses, you can monitor 100 NCM devices or IP addresses. This means you can manage the configurations of 100 devices using NCM.
  5. How does Site24x7's licensing work for stacked switches?

    Site24x7 follows device-based licensing, where one IP equals one network component license (up to 100 interfaces, with an additional component license for the next 100 interfaces). For example, consider a ten-unit stacked switch with a total of 240 interfaces (assuming 24 interfaces per switch). Since it's identified by a single IP address, it is treated as one device. It consumes three network component licenses in total: one license covers the device and its first 100 interfaces, while the remaining 140 interfaces require two additional licenses.

    • Related Articles

    • How to manage licensing for Wi-Fi devices controlled by a wireless LAN controller

      Overview When monitoring wireless environments through a wireless LAN controller (WLC) in Site24x7, licensing is applied based on a simplified model. This article explains how access points (APs) are licensed and how connected devices are handled ...
    • Infrastructure monitors pricing update-March 2023

      Over the years, as we have extensively enhanced our product capabilities and evolved to become a full-stack monitoring platform, we have left our pricing untouched since 2012. With rapid increases in infrastructure costs, we are forced to increase ...
    • How to manage licensing for SDNs and SD-WANs

      Overview When using cloud-based integrations like Cisco Meraki, Fortinet, or VMware VeloCloud SD-WAN in Site24x7, the discovery process can return a large number of devices, including WAN devices, LAN switches, and Wi-Fi access points (APs). This ...
    • What are Basic and Advanced Monitors?

      Site24x7 licensing and pricing work based on the monitor type categorization. For the ease of usage and based on the complexity of monitoring, we have categorized Site24x7 monitors as Basic Monitors and Advanced Monitors. We typically charge for a ...
    • Licensing for VMware monitors

      For VMware components, the pricing is as follows: Monitor Licensing vCenter Free VMware Cluster *Consumes one host monitor license VMware ESX/ESXi Host *Consumes one host monitor license VMware ESX/ESXi Hardware Weightage-based [Consumes one basic ...