Can StatusIQ Restrict the client to see only the products they use?
Can StatusIQ Restrict the client to see only the products they use?
Public IP alert
Request to Alert when a new public IP is created in Azure/GCP
JVM Monitoring Plugin
Is there any plugin integration available for JVM Monitoring supported for Site24x7 Windows Server Agent
Extreme Networks VSP7400 note recognising interfaces or reporting CPU & Power in the readily available template
Hi, Just wondering if anyone has any experience with adding Extreme Networks switches to 24x7. Some I have had no issue, EXOS and VSP based switches. One model I am having an issue is with the VSP7400. There is a template available for this, but on discovery no interfaces are detected. The template also looks like it comes with OID's configured for CPU, power supplies, memory usage, but none seem to work. The switch is recognised, shows up and run this tool also: support.site24x7.com/portal/en/kb/articles/to-check-the-snmp-reachability-using-mib-browser
Notify your Email Subscribers - Need more options
StatusIQ email subscriber notification on schedule-maintenance is limited today for "advanced" notifications. Current option to notify in advance is just 1 hours or 24 hours or time of scheduling, which is too limiting when we work across geos. Is it possible to add couple flexible notification options for notify X hours & Notify Y days in advance, so we can choose say 48 hours & 7 days, etc, to notify sooner than current options. www.site24x7.com/help/statuspage/incident-communication/schedule-maintenance.html
APM Insight Java agent in other servers
Hi, I want to deploy java agent in apache server which is not a supported application server in site24*7 tool, but when I was going through apm insights supported application servers documentation, in the list of supported application servers there was link for other servers. I will add that link here for reference. So wanted to check if I can still deploy java agent in apache server though it is not a supported application server in site 24*7. Please let me know soon. Please find below link for
How to monitor the nproc limit?
Hi Team, I have a server running Oracle WCS and have set "nproc" limits in /etc/security/limits.d/20-nproc.conf. So, my question is how do I monitor the nproc limits? How do I make sure that the process should not fall under a certain limit If that happens how do we set a threshold and send email alerts? In other words, how to handle the monitoring and be alerted when you close the fixed limit? Thanks in advance!! Thanks, Swapnil Pawar
Monitor Windows Firewall state
Hi team, Do we have any way to monitor the Windows Firewall state for Windows Server? We already have an agent installed on the server. We want an alert if Windows Firewall is disabled on any server. I tried doing an Event Log resource check when the Firewall state changes, but it puts the server in trouble for 5 minutes and in next poll, server is back into Up state. Regards, Sandeep H.
Comparison view for monitoring data
Hello, A comparison view would also be nice so that you can compare monitoring data for instance between 09h00-10h00 on two different dates. Or this week compared to the week before. Or this monday compared to the monday before. etcetera... I hope this is clear and makes sense... Regards, Tom
Should not contain strings False alarm
Hi, We have a monitor setup that alerts us if any ERROR keyword is shown in the API response data. Content Checks -> Should not contain strings field: "error" But this is triggering if there are such keywords containing the error part of it. Eg: 'terrorism' We are getting the alert: The String "error" is present in the response. Is there a way to fine-tune this? thanks, Krish
checkpoint firewall device template
Hi Team, we have pysical and cloud guard check point firewall on azure and we wan to monitor the our firewall i am able to enable snmp and the network devices is reflecting but the parameters (CPU ,memory, HA etc are not showing up can you provide the right device template .
Need to take SLA - Executive Reports for more than 3 months
We have a requirement of making SLA reports for 3, 6 and 12 months. But only have the option to take executive sla report for 99 days period. We have a requirement for creating report for 1 yr period. Please enable the option to have SLA reports - Executive Reports for last year. Please expedite the process as the requirement is high. Thanks, Cira NetOps
"error_code": 1100 "message": "You are not authorized to perform this operation
I saw several posting non of them answer how to resolve below error. curl --location --request GET 'www.site24x7.com/api/monitors' \ --header 'Accept: application/json; version=2.0' \ --header 'Authorization: Zoho-oauthtoken 1000.dccxxxxxxx \ --header 'Cookie: _zcsr_tmp=<deleted>-8a24-49f8-8834-fd2249e21176; aeefa57a7c=38a<deleted>ff4ef020ae5; s247cname=1ffe04c9-8a24-49f8-8834-<deleted>; zaaid=<zaaid>' { "error_code": 1100, "message": "You are not authorized to perform this operation" } scope Site24x7.Account.Read,Site24x7.Admin.Read,Site24x7.Reports.Read,Site24x7.Operations.Read,Site24x7.Reports.ALL
Does anyone do any custom Citrix monitoring?
I am looking to see Citrix (server and client) info/stats in Site24x7. Is anything doing this or using a customized solution to integrate this? Thanks!
Windows Server SQL Always on Availability group
I see there is native checks for Failover Clusters Instances, but there are getting used less and less now, in favour for Always on AGs Can I please ask that this be added to the future development.
Parameter forwarding to step endpoint
In my next step I would like to follow this link from parameter forwarding however I am unable to enter the parameter into the endpoint input as the validation kicks in saying it is not a valid url. Are there any workarounds to this problem?
Bulk Action Running forever
there is a very few information about a Bulk action that is running for very long time, I guess for more than 24 hours, and there is no a way to know what is doing and how to stop it or killed
Getting CORS error from Vue.js
Hi, We are getting the following error: Cross-Origin Request Blocked: The Same Origin Policy disallows reading the remote resource at www.site24x7.com/api/monitors/details_page/top_band/…48079003?authtoken=47c602d7411e0ac04243da91cced8cf9&period=2. (Reason: CORS header ‘Access-Control-Allow-Origin’ missing). Does this need to be resolved from the server end?
Does site24x7 support monitoring on Amazon EKS on Fargate?
Dear experts, We host our kubenetes cluster in Amazon Elastic Kubernetes Service (EKS) using AWS Fargate. From the docs, www.site24x7.com/help/aws/eks-integration.html#setup, only Container Insights on Amazon EKS is required to be installed. Does it also imply enabling Container Insights support in ADOT Collector for EKS Fargate works for site24x7 too? The following list of pod metrics is sent to CloudWatch by the ADOT Collector for each of the workloads running on EKS Fargate. Other data points
Can k8s monitoring agent deploy with sidecar pattern?
Dear experts, Knowing that site24x7 k8s monitor agent as daemonset (www.site24x7.com/help/kubernetes/#daemonset). Does it also support running in sidecar pattern? since our k8s cluster can't support Daemonset deployment (AWS Fargate).. Thanks
Onpremise poller Appliance
Hi Team, There was an issue with standby Onprem poller to build it. It would be really helpfull & easy to configure it if you provide it as appliance instead of Installer\binary files. Regards, Manjunath
Display current Value of Server Checks
Would it be possible to have Site24x7 report the current value that is reported back for any server Check e.g. file size, folder size. Site24x7 must receive this value to determine if a threshold has been exceeded therefore the value should be able to display within the portal. This would also be helpful (if the polled values are recorded) to determine the rate of growth/change in value With MIBS on network devices it is possible receive a current reported value to test that a meaningful value is
Issue with Windows where multiple hosts are recognized as one
Good afternoon friends, I'm getting in touch because I have a client that has 4 Windows 2019 VMs that were installed using the same application template and from what the person who installed it, sysprep had been run on it, but when I put the agent from Site24x7, the host is taking the Hostname of one VM and the IP of the other. I would like to know from friends if they know any way to check if the machine has the same installation ID and how to solve this without having to reinstall the system.
Two way intergation with site24*7 and Jira
Two way integration with site24*7 and Jira We recently integrated site 24*7 with Jira ITSM for auto-ticket generation But site24*7 confirming there is no feature available to update Jira ticket information in outage comment section of appropriate URL for MSP customers if it went down. Like URL goes down in site24*7, Jira ticket will be created but i need that ticket information to be updated in site24*7 for that appropriate outage.
Can we monitor IBM MQ 9.0 with site 24x7?
Can we monitor IBM MQ 9.0 with site 24x7? like alert if queue depth reaches threshold & if Queue manager goes down
BiWeekly Scheduled Maintenance
Hi, I would like to request the ability to schedule maintenance windows every two weeks. Right now Daily, Weekly, and Monthly are available but having one every two weeks matches our current setup. Thanks!
On call Schedule
Hello Team, Is the on call schedule option available? I can't find it under user management.
Whenever we are trying to trigger a test on webbook integration its showing error message "There is an error occurred in the server while processing the request."
Whenever we are trying to trigger a test on webbook integration its showing error message "There is an error occurred in the server while processing the request."
Any Idea what are the migration tools used during as400 migration to any major cloud platform like AWS, Azure, GCP ,etc?
Need information
Include disable suppress the UP alert in third-party integration's
Hi, like include disable suppress the UP alert in third-party integration's because when send alert on webhook whith platform tikects is duplicate. one for DOWN and other for UP
Disk space monitoring
It would be nice to have many % value for monitoring disk space 15% 10% 5%. Or better alert on free space in term of Free Giga bytes. The problem is monitoring a 10 tera bytes volume 15% is still a lot of free space 1.5 Tera byte Ghislain@eyet.ca
Manually add outage for multiple monitors
Hi! Is there a way to manually add outage for multiple monitors? We have 26 monitors so it's bit of a hustle to add it manually for each and every monitor. Thank you in advance! Best regards, Roko Stanicic
Feature: Use Powershell Core on Linux to perform WMI Monitoring with Linux On-Premise Poller
Please help provide a way for monitoring Windows servers using a Linux (RHEL/CentOS) On-Premise Poller. It would be so helpful to consolidate the pollers and not require a Windows and Linux type poller. Monitoring via agent-less methods, such as WMIC with PowerShell on Linux would be a good way to accomplish this. Instructions for Powershell on Linux docs.microsoft.com/en-us/powershell/scripting/install/installing-powershell-on-linux?view=powershell-7.2 Sample WMIC Query using Powershell could then
Brand the custom Dashboard
Is it possible to Brand the custom dashboard for the customer by changing URL and add our logo icon?
Show the complete and not partial periods in the reports
Could you help me by telling me if there is any way for the reports to show the complete and not partial periods in the reports that come out of the dashboards. For example, that 30-day report that the period 1, 2, 3, 4, etc. goes well. The dashboards that we can export in PDF then in PDF and this dashboard we share to our clients, and they are confusing to visualizing that dashboard because they can't see all days.
Proxmox VE VM Backup Monitoring
Good afternoon, I would like to know from friends, if anyone here on the forum uses the 24x7 site to monitor Proxmox VM Backup. Today I don't have a functional monitoring of Proxmox VM Backups and I would like to use the 24x7 site for this task, in this case I identified which log file Proxmox uses to make its full backup, in which case I would have to do it somehow that site24x7 when seeing a certain word in the log, it creates an alert in the interface. Could anyone tell me where to start to do
MongoDB plugin error
Hi I am getting error in mongodb plugin /bin/sh: 1: /opt/site24x7/monagent/plugins//mongod/mongod.py: not found Even though file exists
Please add support for Onpremise poller API HA configuration
Currently there is no way to fully automate the deployment of site24x7 onpremise poller in a HA configuration. Deployment can mostly be automated, however setup of HA can only be done via clickops in the browser.
Recurso tipo API no lo estoy censando en mis tableros
Buenas días Por favor su ayuda para validar por que un API no me esta censando, en mi tablero de recursos de Nube, alguna recomendación
Monitor daily email
We are using a Web Transaction Based monitor to check whether our contact form on our site is still ok. Works great. We test it once a day, and we get the resulting email in our mailbox. Is it possible to monitor that mailbox for the daily arrival of that email?
Next Page