Check bandwidth utilization of a server

Site24x7 Server monitoring provides information on critical performance metrics of a server. One among them is to check the bandwidth utilization of a server. 

The bandwidth utilization is the amount of bandwidth utilized from the total bandwidth available. This metric provides information on the server network communication.

The bandwidth utilization of your server can be viewed by logging in and navigating to Server > click on your server monitor > Network

The bandwidth utilization w.r.t the input and output traffic are shown. Clicking on the value under bandwidth utilization, gives a graphical view of the average data sent and received for output and input traffic respectively.

The user can also share the attribute report via email or export it as PDF/CSV file by clicking the Share This button on the top right corner of the report

• Related Articles

• Average resource utilization by AppLogs agent

  Metrics Windows Linux CPU < 1% 0.3% Memory 40 MB 25 MB Peak network 2 MB in 30 seconds 2 MB in 30 seconds Disk 100 MB 100 MB This resource utilization is subject to change when more log types are associated with a single server or the same AppLogs ...

• How to edit the bandwidth configuration of network interfaces?

  Why is bandwidth configuration required? The bandwidth configuration essentially defines the maximum throughput (in Mbps, Gbps, etc.) that the link can handle. This value serves as the denominator when calculating utilization percentages. Rx Utilized ...

• How to set the maximum CPU and memory usage by Site24x7 Windows server monitoring agent after installation?

  Follow the instructions below to set the maximum CPU and disk memory used by Site24x7 Windows server monitoring agent. Open the command Run terminal, enter regedit, and click OK. Navigate to HKEY_LOCAL_MACHINE > SOFTWARE > WOW6432Node > ManageEngine ...

• How are the metrics calculated in agentless server monitoring?

  SNMP server monitoring Metrics such as CPU, Memory, and Disk utilization are collected via SNMP using the OIDs given below: Attribute OID CPU  .1.3.6.1.2.1.25.3.3.1.2 Memory  .1.3.6.1.2.1.25.5.1.1.2 Disk  .1.3.6.1.2.1.25.2.3.1.6 Free Disk Space (MB)  ...

• Amount of bandwidth consumed for monitoring VMware resources

  Learn the minimum bandwidth usage when monitoring VMware resources, both between your On-Premise Poller and the VMware environment and between your On-Premise Poller and Site24x7. Bandwidth consumption depends on the number of resources in the ...